Surfaces in contact with water, especially hard water, will gain some limescale over time. To prevent its accumulation and the appearance of stains, it is essential to know how to clean limescale.

In this article, you will find out what it is, how to clean it and the product recommended to remove limescale.

What is limestone?

This is a limestone compound (calcium carbonate, CaCO 3 ) which, as a rule, is found on surfaces or utensils that have regular contact with water. Effective removal of this problem depends on the frequency of cleaning and the product used.

4 essential steps to know how to clean limestone

Regular cleaning carried out with the right steps is half the way to avoid the accumulation of this material on your surfaces, which leads to the appearance of stains and can damage the area where it appears.

This is a problem that appears, above all, in bathrooms: bathtubs, tiles, taps or even glass. This way, and before discovering the most suitable product, take note of the following cleaning tips.

Dry surfaces after use

As limescale formation comes mainly from contact with water, it is best to dry the area after each use. For example, after taking a shower you can reduce excess humidity on the windows with the help of a cloth.

This step, along with weekly cleaning, maintains the quality of the materials in your home.

Take care of limescale stains

It is important to pay special attention to the formation of stains, which must be taken care of as soon as possible. For example, do you know how to clean limescale on windows? Making a solution based on baking soda and vinegar and leaving it to act for a few minutes allows you to eliminate limescale stains.

To obtain correct cleaning

Cleaning utensils, how the product is applied and how long it lasts have an influence on the final result. Therefore, following the product instructions exactly allows you to correctly clean and eliminate limescale.

What is the recommended product to remove limescale?

In addition to damaging the appearance of surfaces and leaving marks, limescale can be detrimental to the performance of some objects. For example, it has the ability to block water pressure in taps over time.

There are different specific products to fulfill this task. However, only Multiusos WC Figo is made from used cooking oil.

The fact that it is an upcycling detergent means that it has the following sustainability impacts:

  • 27% Circular Economy Product
  • up to 16.5 thousand liters of water protected from contamination
  • 20% Natural resources avoided

It is a product suitable for daily cleaning and descaling of various types of surfaces in the bathroom, eliminating the limescale that accumulates on them.

How to clean with the Figo Multipurpose WC?

  1. Apply the product by spraying directly onto the surface to be cleaned;
  2. Leave it to act for a while (at least 30 seconds) and rub if necessary;
  3. Rinse with clean water and wipe with a dry cloth to finish.

What are its differences in relation to WC Creme?

Multiusos WC Figo has an acidic pH that allows it to remove inorganic dirt and descale, thus removing limescale. It cleans sanitary ware and various types of surfaces, especially taps, drains and porcelain.

Another of the particularities of Multiusos WC Figo is that it leaves a super shiny finish on surfaces, in addition to an incredible fig smell.

On the contrary, WC Creme has an alkaline pH to remove organic dirt. With a high concentration of cleaning agents and abrasives, it effectively removes and degreases all types of dirt. It also cleans sanitary ware and various types of surfaces.

Now that you know how to clean limescale and which product is best, you have enough knowledge to keep your surfaces clean and limescale-free.

Author: Daniela Matos